2
explosion-proof duct fan
WP-11/Ex
04.06.2019
1.
Introductory Remarks
The purpose of the present
Use
and Maintenance Manual is to supply User with directions wi-
thin the range of application, installation, start-up and the use of the
WP-11/Ex
explosion-proof
duct fans
.
Installing, start up and operational use are exclusively admissible after getting acquaint-
ted with the contents of the Use and Maintenance Manual
.
With regard to continuity of work carried on
improvement
of our
products, we reserve for oursel-
ves the revision possibility of the
draft and
technological changes improving their functional fea-
tures and safety.
Construction of the
WP-11/Ex
e
xplosion-proof duct fans
meets
the
requirements of the current
state
of technology
as well as the safety and health assurances included in:
2006/42/EC
Machinery Directive
of the European Parliament
and of the Council of
May 17
th
,
2006 on machinery
– amending the 95/16/EC (recast)
/
Journal of Laws EC L157 of 09.06.2006, page 24
/
2014/35/EC Directive
of the European Parliament and of the Council of February 26
th
, 2014
on the harmonisation of
the
laws of the
Member States relating to the making
available
on
the
market of electrical equipment designed for use within certain voltage limits.
/
Journal of Laws EC L96 of 29.03.2014
/
2014/34/EC ATEX Directive
of
the
European Parliament and of the Council of February 26
th
2014 on the
harmonisation
of
the
laws
of
Member States relating
to
equipment
and
protective
systems intended for use in potentially explosive atmospheres.
/
Journal of Laws EC L96 of 29.03.2014
/
Additionally, the appliance meets following harmonized standard:
●
EN ISO-12100:2012
–
“Safety of
machinery
–
Basic concepts, general
principles
for design. Risk assessment and risk reduction”.
●
EN 60204-1:2018-12
–
“Safety
of machinery
–
Electrical equipment of machines.
Part 1: General requirements”.
●
EN ISO 13857:2010
–
“Safety
of
machinery
–
Safe distances
to
prevent hazard
zones being reached by upper and lower limbs”.
●
EN 80079-0:2013/A11:2014
–
“
Electrical appliances in areas of gas explosion
risk.
Part 0:
General requirements”.
●
EN 60079-7:2016-02
–
“Electrical appliances
for areas of gas explosion hazard.
Part 7: Increased safety construction “
e
”.
●
EN 1127-1:2011
–
“
Explosive
atmospheres.
Explosion
prevention
and protec
-
tion
. Basic terminology and methodology”.
●
EN ISO 80079-36:2016-07
–
“Explosive atmospheres
– Part 36:
Non-electrical equip-
ment for
explosive
atmospheres.
Methodology
and requi-
rements.
●
EN ISO 80079-37:2016-07
–
“Explosive atmospheres
–
Part 37:
Non
-electrical equip-
ment
for
explosive
atmospheres.
Non-electrical types of
protection.
Constructional safety
“
c
”
, supervised ignition
“
b
”, immersion in a liquid “
k
”.
●
EN 14986:2017-02
–
“Designing of fans applied
in areas of explosion hazard”
●
ISO 14694:2003+AMD1:2010
–
“Industrial fans – Guidelines on the quality of balancing
and the vibration level.
●
ISO 14695:2008/AC:2017-10
–
“Industrial fans
– Methods
of measurements of
vibration
of fans.
