Klimawent
– the warranty of highest quality at attractive price
2 of 4
Grinding-Welding Station SLOT
19.03.2021
INTRODUCTION
This user manual is intended for the user of the
SLOT
device. Its purpose is to provide the user with instructions
on the use, assembly, commissioning and operation of the device.
Carefully read this manual before installing the device at the workplace and using it.
Due to the constant improvement of its products, the manufacturer reserves the right to make
constructional changes aimed at increasing the utility values and safety of use.
APPLICATION
Grinding-Welding Station
SLOT
is designed for extracting air polluted with dry dust emitted mainly during
welding works, but also during other processes such as wood processing, grinding, metal deburring, etc.
After replacing the grate, it can be used to extract dust resulting from manual cutting with a plasma torch – see
below – Table 3 Additional equipment – Replacement grates.
Dust extraction takes place directly at the source of their emission, from below through the suction chamber
with a grate and from the side through the side suction chamber.
The stand requires a connection to an exhaust fan, filtration device or central extraction system with
appropriate parameters - see below - Table 1 Technical data of
SLOT
stands.
MANUFACTURER'S DISCLAIMER
The manufacturer is not liable for damages resulting from incorrect and improper use of the device.
It is unacceptable to install any additional elements not included in the device or equipment on the
device.
Unauthorized alterations and modifications to the device are not allowed.
The device should be operated and repaired by an authorized and trained person.
Protect all machine components against mechanical damage.
The manufacturer is not liable for bodily injury resulting from incorrect use.
Before installing the device, check the load capacity of the structural components to which it will be
attached. Incorrect, careless or unstable mounting of the device may damage it, and also pose a real
threat to people nearby.
TECHNICAL DATA
Table 1 Technical data of SLOT
Type of SLOTs
Part no.
Recommended volume
flow of fan [m3/h]
Mass
[kg]
Load capacity
*
[kg]
SLOT 1600
813S13
1600
57
500
SLOT 2000
813S14
2000
75
SLOT 3000
813S15
3000
94
SLOT 4000
813S16
4000
113
Load capacity is given in relation to the entire surface of the working grate
STRUCTURE AND FUNCTION
Grinding-Welding Station
SLOT
is a chamber with a grate constituting the storage table and a side lashing
mounted above the grate.
Each station has a connection stub on both sides of the chamber. There is a drawer for accumulating dust
under the grate – see Figure 1.
When using a device for manual cutting with a plasma torch, a replaceable grate should be used instead of
the standard one – see Table 3.
