4
flame cutting table
SCT-2100
10.01.2019
8.
Troubleshooting Guide
Table No.2
Problem
Possible reason
Remedial measure
obstruct extraction of dust the inlet grill of the fan or
clean or replace the grills or remo-
hood (of the filtering unit) is ve the obstruct objects that got
clogged
stuck in the inlet
the micro-switch is faulty
replace the faulty elements
failure of the servo opener
the shut-off damper
9.
Maintenance
The maintenance consists only in periodical cleaning the grill and grate.
During these operations it is important to disconnect the device from
the pneumatic supply system
.
10.
Occupational Health and Safety
Start-up and maintenance are exclusively possible after getting acquainted with the contents
of the present Use and Maintenance Manual. While the device is in operation, do not under-
take neither assembly- dismantling activities nor repair.
Any repair and maintenance activities should be performed exclusively
by an authorised person or by a servicing team of the manufacturer
.
Having completed the repair, check if any elements, tools
(that could damage the construction)
have been left within the structure of the flame cutting table.
11.
Transport and Storage
The device is transported in single modules. The modules are placed on palettes and protec-
ted from damage and uncontrolled slide (displacement).
12.
Terms of warranty
The period of warranty for the purchased device
is
indicated in the
“
Card
of
Warranty”. The
warranty does not comprise:
● mechanical damages and malfunctions caused by User,
● device failures caused during the use which is in contradiction with the purpose
of applica-
tion
and with the present Use and Maintenance Manual,
● malfunction resulting from the improper storage or incorrect maintenance.
Infringement of
the Section 3 “Reservations of Producer” of the present Use and
Maintenance
Manual
and
especially modifications undertaken by User on one’s own or use in contradiction
with the
purpose
of
application
–
shall result in the loss of warranty validity.
