13
10.01.2019
Standing Extraction Arm
ERGO LUX-
{
M
;
K
;
L
;
D
}-
R
ASSEMBLY INSTRUCTION – EXTRACTION ARMS TYPE ERGO LUX-
{
M
,
K
,
L
,
D
}
-R
1
.
Take out the ERGO LUX-R extraction arm from the transport package and put it stably on
the even surface.
2
.
Pull the arm segments apart to enable further assembly.
3
.
Screw up the swivel support,
to the plate of the lower joint
– according to the information
in Fig. No.
5
D
etail “
C
”.
4
.
Fold in the loose hose fabric edge (to even it up),
at the end of the hose
– then sleeve the
hose onto the swivel ferrule and secure it with a hose clamp.
5
.
Screw together the terminations of the gas spring with a plate of the lower joint
–
accor-
ding to the Fig. No.
5
D
etail “
A
” (see also Photo No.
1
).
6
.
Connect the
segment
II
with the
segment
I
using a hose
– according to information in the
Clause
4
.
7
.
Screw up the element of the hood joint, with the pipe
– according to the information in Fig.
No.
6
, Detail “
B
”.
8
.
Using a hose, connect the
segment
II
with the hood
– according to the information in the
Clause
4
.
9
.
Install the ERGO LUX-R extraction arm at a wall bracket or to a device
(see Photo No.
1
).
Fig No.5
CAUTION
:
In case of extraction arms
ERGO LUX-L-4-R
,
ERGO LUX-D-3-R
and
ERGO LUX-D-4-R
in
the middle joint, is introduced the additional gas spring.
