-25-
INSTRUCTIONS FOR USE MODEL REMOTE
Options:
• Turn on and off the power supply on the I/0 switch
• 3 main running modes
• 6 pre-set running modes, selected through quick-buttons
Main modes through MODE-button on the remote:
• AUTOMATIC mode
• SURVEILLANCE mode
• MANUAL mode
Pre-set modes through QUICK-buttons on the remote:
• NIGHT mode
• BOOST mode
• MASTER-SLAVE AIR FLOW mode
• SLAVE-MASTER AIR FLOW mode
• EXTRACTION mode
• INTAKE mode
REMOTE:
• S-Unlock button
• V-Manual speed selection
• H-Relative humidity threshold selection
• M-Main modes selection
• N-Night mode selection
• B-Timed extraction mode selection
• F-Air flows mode selection
• R-Filter alarm reset
WARNING:
The remote control gets into stand-by mode after being inactive for 60 seconds, when the icon with key
appears on display. To unlock press the button (S) on the upper side of the remote control.
WARNING:
If the unit is connected to other units in the same system, only the MASTER unit will receive commands
that will transfer to all the other SLAVE units connected in sequence.
