9
NOTE:
Never submerge the appliance under water. Never clean or place the appliance
under tap water.
Anti-Calc System
The filter is designed to reduce the build-up of limestone which occurs during
steam ironing which would generally prolong the life of your iron. However, please
note that the filter will not completely stop the natural process of limestone
build-up.
The filter should be properly maintained and replaced with a new one every 2-3
months if used often (once every 1-2 days). Before replacing, the filter it can be
used continuously and the working life of the filter does depend on the water you
use. However the limestone will most likely be built up in the steam chamber and
this may happened depending on your local water quality. It is suggested that you
replace the water filter as soon as possible or mix with 50% proportion of distilled
water.
Emptying and Storing
Step 1 -
Disconnect the appliance from the power supply and allow the appliance
to completely cool down.
Step 2 -
After use, slide out the water tank and pour out all the remaining water.
Step 3 -
Wind the power cord around the cord storage located on the base unit.
Step 4 -
The iron should be placed on the iron rest plate, lay the handle down.
Cleaning and Maintenance
Step 1 -
Disconnect the appliance from the power supply and allow the appliance
to completely cool down.
Step 2 -
Clean the iron with a damp cloth.
Step 3 -
Wipe off the scale and other deposits on the soleplate with a damp cloth
or non abrasive (liquid) cleaner.
