Klenn Air Horns JL-JK-OBA, Руководство по установке

Страница: 31 / 35

JL-JK-OBA
Installation and Operation Manual
Go to Table of Contents PG 31/35 REV: A (1/21/2019)
10.3.3. With JK- 201 over Ground Strap Stud at point “B”, as s hown in Figure 15 above and Figure 18 below,
reinstall OE nut removed using hardware #12 over bracket, as shown in Figure 19. Hand tighten.
Figure 18 – Ground Strap Nut removed; JK-201 Tank Bracket shown in place
10.3.4. Insert three (3) #6 facing downwards through JK-201 and JL- 204 at holes “A” , as shown in Figure 15 .
10.3.5. Secure JK-201 & JL-204 with hardware #10, #14, & #20, as shown in Figure 16. Hand tighten fasteners.
10.3.6. Install hardware #7, #16, & #22 through h ole “C” , as shown in Figure 15 and below; this hole intersects a
tapped hole in middle crossmember. Hand tighten.
Figure 19 - JK-201 Mounting Points
E
D
C
B
FRON
T
B
FRON
T