Klenn Air Horns JL-JK-OBA, Руководство по установке

Страница: 26 / 35

JL-JK-OBA
Installation and Operation Manual
Go to Table of Contents PG 26/35 REV: A (1/21/2019)
Figure 10 - JK-201 to JKU Mounting Points for Hardware
10.1.4. Re-install two (2) M8 bolts back into evaporative canister through JK-201 Tank Bracket at location “ A ”,
as shown in Figure 10 . Hand tighten.
10.1.5. Install hardware #4, #14 (2), #20 and #10 into front hole of JK-201 going through crossmember at
location “B” , as shown in Figure 10 . Ensure bolt is inserted from bottom with nut above crossmember;
hand tighten.
10.1.6. Install hardware #5, #14 (2), #20 and #10 into rear hole of JK-201 going through crossmember at
location “C”, as shown in Figure 10 . Ensure bolt is inserted from bottom with nut above crossmember;
hand tighten.
Insert Here
FRONT
FRONT
D E
A
B C