8
|
P a g e
Step
5
: Test the System
If you have any installation questions or problems, call for tech support
520.579.1531
Copyright 202
1
Kleinn Automotive Accessories
1.
Press
"Lock>UNLOCK>Lock
"
on your OEM remote control. You will see the Blue light on the remote start module
every time you press the Lock or Unlock buttons. Each press should be about 1 second apart.
The vehicles ignition/
accessory circuits
will turn on
after a few seconds. Another few seconds later the starter motor will engage.
2.
Step on the brake pedal to stop the engine.
•
EVO-ALL Remote Start Data Module
•
THAR-GM
6
T-Harness
•
Toggle Switch
•
Pin Switch (not needed for most vehicles)
Step
7
: Close it Up
Now gather up all of your wiring and neatly bundle it together using zip ties or electrical tape. Find a secure place to put
the remote start module and use zip ties to secure it.
Make sure that the remote start wires are not near any
moving parts on the steering wheel, pedals or emergency brake! Re-Install any panels that were removed to
gain access to key switch in reverse order they were removed.
Be careful not to pinch any wires.
ENJOY!
Parts List
Step 6: Record your service number
Your EVO-ALL module has a unique service number. Before closing up
the installation, record that. In the event Kleinn tech support needs to
troubleshoot your system, they may need your service number to look up
the current status of your module.
001A07
_______________
____
Remote start
the vehicle.
START
All doors must
be closed.
Press
the Unlock button of the
remote car starter.
UNLOCK
Enter
the vehicle with the
Intelligent Access Key.
The vehicle can now be
put in to gear and
driven.
.
OFF
NOTE:
If the vehicle is not unlocked the module will shut down the remote-
starter and the vehicle as soon as any door is opened.
