WARNING:
Attach the tether only to the
rear metal ring
of the harness!
Use the front metal ring
for attaching a leash.
Proper handling:
Loosen the straps and carefully fit the safety harness onto your
dog. Adjust the harness so that it is snug, but not too tight.
Always
pass the ends of the straps through the buckle one more time for
added security.
Make sure the vehicle seatbelt is fastened and then use the locking
carabiner to attach the tether to it.
When transporting your dog in the vehicle, always make sure to
hook the swivel eye bolt snap of the tether to the
rear metal ring
of the harness. Simply unhook the snap to remove your dog.
The
front metal ring can be used to attach a leash.
Safety notice:
Always transport your dog on the back seat of the vehicle –
preferably behind the (unoccupied) front passenger seat.
Care and cleaning:
Remove any accumulated dirt and hair, and use neutral soapy
water to occasionally wash the fittings, chest plate and harness.
Important notice:
Regularly inspect your ALLSAFE dog safety harness for wear, tears
and damage, and replace the entire safety harness as necessary.
Edition: May 2014
WARNING: DANGER OF INJURY!
Please keep your dog away from
the carabiner while entering or
leaving the car.
Raise or cover the
remaining tether with the carabiner.
Item No.
15380100
15380000
15380200
15380300
Size
S
M
L
XL
Weight
15 oz (410g)
24 oz (670g)
26 oz (740g)
27 oz (770g)