background image

ENGLISH

MAINTENANCE 

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained. Contact Klein Tools for authorized service centers. Visit

 for service manual and replacement part list.

• The charger and battery pack are 

NOT

 serviceable. To assure product safety and reliability, repairs, maintenance

and adjustments should be performed by a DeWALT factory service center, a DeWALT authorized service center
or other qualified service personnel. Always use identical replacement parts.

• Use only 

Shell Telus T15

 or an equivalent hydraulic fluid when changing or adding oil.

• Inform Klein Tools authorized distributors or contact Klein Tools in case of any abnormalities or malfunctions of

the product.

Shell

®

 and Tellus

®

 are registered trademarks of Shell Trademark Management B.V.

CLEANING

Tool:

• Blow dirt and dust out of all air vents with clean, dry air at least once a week. To minimize the risk of eye injury,

always wear ANSI Z87.1 approved eye protection when performing this.

• Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals

may weaken the plastic materials used in these parts. Use a cloth dampened only with water and mild soap.
Never immerse any part of the tool into a liquid.

Charger:

WARNING

SHOCK HAZARD

. Disconnect the charger from the AC outlet before cleaning. Dirt and grease may 

be removed from the exterior of the charger using a cloth or soft non-metallic brush. 

DO NOT

 use water or any 

cleaning solutions. 

STORAGE

The best storage place is one that is cool and dry, away from direct sunlight and excess heat or cold. For 
prolonged storage, it is recommended to store a fully charged battery pack in a cool, dry place out of the charger 
for optimal results. 

NOTE:

 Battery packs should not be stored completely depleted of charge. The battery pack will 

need to be recharged before use.

WARRANTY – TOOL

Klein Tools Battery Operated Tools, manufactured and sold for commercial or industrial uses, are warranted to be free 
from defects in materials and workmanship. 
THERE ARE NO IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS. At its option, Klein will repair, replace, or 
refund the purchase price of any product which fails to conform to this warranty under normal use and service. There are 
no user serviceable parts in this tool. This warranty does not apply if repairs have been made or attempted by non-Klein 
Tools Authorized Repair Centers, if alterations have been made, or if the tool has been abused or misused. 
IN NO EVENT SHALL KLEIN TOOLS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE. Some states do not allow 
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. 
See

for additional information.

WARRANTY – CHARGERS AND BATTERY PACKS

DeWALT 

chargers

 are covered by:

Three Year Limited Warranty

: DeWALT will repair, without charge, any defects due to faulty materials or 

workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal 
wear or tool abuse. This warranty does not apply to accessories or damage caused where repairs have been made 
or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in 
certain states or provinces.
DeWALT 

battery packs

 are covered by:

Two Years free service on Packs:

 DCB201, DCB203, DCB203BT, DCB207.

Three Years free service on Packs: 

DCB200, DCB204, DCB204BT, DCB205.

Product warranty voided if the battery pack is tampered with in any way. DeWALT is not responsible for any 
injury caused by tampering and may prosecute warranty fraud to the fullest extent permitted by law.

12

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание BAT20-7T Series














Отзывы: