Instruction
Manual
ENGLISH
www.kleintools.com
For Professionals...Since 1857
®
Instruction
Manual
CL3000
• DATA HOLD
• BACKLIGHT
• RELATIVE
READING
• AUTO / MANUAL
RANGE
• 3-3/4 DIGIT
3999 COUNT LCD
ENGLISH
69204
AUTO
V
DC
CL3000
Instruction Manual
GENERAL SPECIFICATIONS
The Klein Tools CL3000 is a multi-function fork meter. It measures AC / DC
voltage, AC current, resistance, capacitance, frequency, and duty cycle.
It can also test diodes and continuity.
•
Operating Altitude:
2000 meters
•
Relative Humidity:
75% max
•
Operating Temperature:
0°C / 32°F to 40°C / 104°F
•
Storage Temperature:
-10°C / 14°F to 50°C / 122°F
•
Accuracy Temperature:
18°C / 64°F to 28°C / 2°F
•
Beyond Accuracy Temperature:
0.1*(specified accuracy) / ° C
•
Sampling Frequency:
3 samples per second
•
Jaw size:
12mm max conductor size
•
Dimensions:
7.5" x 2.7" x 1.7"
•
Weight:
7.4 oz.
•
Calibration:
Accurate for one year
•
CAT Rating:
CAT III 600V
•
Accuracy:
± (% of r # of least significant digits)
WARNINGS
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring
a known voltage or current.
• Never use the meter on a circuit with voltages that exceed the category based
rating of this meter.
• Do not use the meter during electrical storms, or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fingers away from
the metal probe contacts when making measurements.
• Do not open the meter to replace batteries while the probes
are connected.
• Use caution when working with voltages above 60V DC,
or 25V AC RMS. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock,
replace batteries if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out
power before measuring resistance or capacitance.
• Always adhere to local and national safety codes. Use individual protective
equipment to prevent shock and arc blast injury where hazardous live
conductors are exposed.
SYMBOLS
~
AC Alternating Current
Warning or Caution
DC Direct Current
Dangerous levels
DC/AC Voltage or Current
Double Insulated Class II
Ground
AC Source
