Klein + Hummel PRO X 6, Инструкция по установке и эксплуатации, Страница: 3 / 14

2. Installation und Operation
2.1 Delivery Contents
1 Loudspeaker P
RO
X 6
1 Manual P
RO
X 6
2.2 Operating Conditions
The loudspeaker cones are coated to provide moisture resistance. However, the Birch plywood housing is not de-
signed to be left outdoors for long periods of time without an additional protective coating applied. Brief showers
will cause no damage.
2.3 Mounting Options
Mounting is via two M8 threaded holes in each of the top, bottom and left sides. One M8 threaded hole is on the
right side. Compatible with LH25 and LH26 U-brackets for horizontal or vertical mounting. Use CL4 cluster bracket
for arrays as shown in the mounting diagrams.
2.4 Connection and Operation
The amplifier connection is made using a Speakon NL4 connector with Pin 1 +/- feeding the speaker’s internal pas-
sive crossover. Pin 2 +/- are wired to the “through” connection, but are otherwise not used.
For optimum performance and for the protection of the speaker, it is recommended that an appropriate controller
is used in the system such as the PRO C28 or PRO C24.
3. Diagrams
The outstanding acoustic performance of the Pro X 6 is confirmed by technical measurement as shown in the fol-
lowing diagrams
Figure 2: Free field frequency response Pro X 6
Page 2