Klein + Hummel M 52, Руководство по эксплуатации

Страница: 8 / 20

Klein + Hummel
M 52 (D) Page 6
BNC digital BNC digital BNC digital BNC digital input input input input connections on the M 52 D connections on the M 52 D connections on the M 52 D connections on the M 52 D
If there are multiple M 52 D monitors connected together using BNC T-piece connectors,
the first one should be set to “AES” or “BNC” as appropriate. The rest should be set to
“BNC”, except the last one which should be set to “BNC 75
Ω ”. Finally, an appropriate
setting should be made on the front panel signal selector switch depending on the
location of the loudspeaker.
Note that the BNC connector has no output driver. When using the AES3 input, the output
level is derived passively from the AES3 signal’s input level. This has a wide tolerance,
therefore the length of the interconnection cable and number of loudspeakers will depend
on the level of the source signal and quality of the interconnecting cables.
Multiple Multiple Multiple Multiple M 52 D M 52 D M 52 D M 52 D connections connections connections connections using BNC using BNC using BNC using BNC
It is possible to have an analog XLR and a digital BNC cable simultaneously connected to
the loudspeaker. The signal selector switch is used to monitor the required input.