In digital mode, this same XLR input accepts the digital signal
according to the AES/EBU specification (110 Ohm balanced).
2.5 Digital inputs BNC, XLR
The BNC digital input configured as a 75-Ohm connector, is
intended to receive signal sources in S/P-DIF or AES 3id
format. The incoming digital signal line requires
one
75-Ohm
terminator at the very end, as the M 51 D has no internal
termination. The XLR input and the BNC input are wired in
parallel across a transformer. The fact that the termination is
wired externally allows you to make connections in a wide
variety of ways:
2.5.1 Source 1x AES/EBU, Monitors connected with
each other via BNC cable
2.5.2 Source 2x AES/EBU
2.5.3 Source 1x S/P-DIF, AES 3id, connection using
two T-connectors
In digital mode, this same XLR input accepts the digital signal
according to the AES/EBU specification (110 Ohm balanced).
2.5 Digital inputs BNC, XLR
The BNC digital input configured as a 75-Ohm connector, is
intended to receive signal sources in S/P-DIF or AES 3id
format. The incoming digital signal line requires
one
75-Ohm
terminator at the very end, as the M 51 D has no internal
termination. The XLR input and the BNC input are wired in
parallel across a transformer. The fact that the termination is
wired externally allows you to make connections in a wide
variety of ways:
2.5.1 Source 1x AES/EBU, Monitors connected with
each other via BNC cable
2.5.2 Source 2x AES/EBU
2.5.3 Source 1x S/P-DIF, AES 3id, connection using
two T-connectors
