Instructions for use, installation and connection
7
General setting options of oven control
•
Sound signal volume
−
When no other function is active it is possible
to set the sound signal volume by touching the
sensor
(4b).
The display
(d4-6)
indicates
symbols of 4 volume levels.
•
Sound signal duration:
−
oven operation period sound signal
(d4-1),
end
of oven operation
(d4-2)
and meat probe
(d4-3)
last 7 minutes;
−
alarm timer sound signal
(d4-4)
lasts 3
minutes
−
After the expiry of the indicated time the sound
signal goes off automatically.
•
Each touch of the sensor is accompanied by
a beep
.
•
Increasing the speed of the display setting.
Pressing the sensor for a period of 5 seconds
continuously can increase the speed of the
displayed setting.
•
Simultaneous pressing of (-) and (+) sensors
(3a/3b) ali (4a/4b)
Resets the settings to “0”, except for the
temperature setting display
(d3-1)
which is
changed to 30°C, and the end of operation
sensor
(d4-2)
which changes to indicate the time
of day.
In case the ON/OFF sensor
(5)
is not pressed
within 5 seconds, all settings are reset
automatically, except for the time of day and the
alarm timer.
In case of power failure less than 1 minute long,
all settings remain unchanged and the oven
resumes normal operation (if activated).
