•
Adjust the temperature and select the cooking method .
Example :
"CONVENTIONAL", position, 200°C temperature mark.
•
Press the "PROGRAMMING"
Button (5)
once.
The cooking time (indicating 0.00) and the cooking time symbol flash to show that the time can be adjusted.
The cooking time may be set to any time up to 23 hours and 59 minutes.
•
Press the
+
and
-
Buttons (6)
to adjust to the time you require.
Example: 25 minutes cooking time
Press once on
+
, to stop the flashing.
•
Press the "PROGRAMMING"
Button (5)
until the time for the end of cooking and the corresponding symbol flash.
This may now be adjusted.
•
Press the
+
and
-
Buttons (6)
to adjust to the time you want cooking to end.
Example: cooking to end at 1 pm (13.00).
The time for cooking to end is registered automatically after a few seconds.
The display shows the time on the clock again.
The oven will then defer heating up so that the cooking time will end at the time programmed (eg 1 pm (13.00).
When cooking starts, the "end of cooking" symbol goes out.
You can :
- change the cooking time at any point by repeating the operations described above,
- check how much cooking time remains at any point by pressing the "PROGRAMMING"
Button (5)
- cancel the programming at any point by pressing the "PROGRAMMING"
Button (5)
for a few seconds
until you hear a bleep.
At the end of the cooking time,
- the oven stops,
- the cooking time symbol goes out,
- the cooking time display indicates 0.00
- the oven bleeps for a few minutes.
Stop the bleeping by pressing any button; the display shows the time on the clock again.
WARNING : your oven then starts to heat up again.
To stop the oven heating up, turn the temperature and function selection knobs to the "off" position.
Nb:
Your oven is fitted with an electronic timer not dependent on the operation of the oven, for counting down a
given time.
•
Press the "PROGRAMMING"
Button (5)
a number of times until the timer symbol and the corresponding display flashes
•
Set the time required by pressing on the
+
and
-
Button (6)
. Adjustment is by blocks of 30 seconds; the time displayed
is in minutes and seconds (from 0 to 59 mins. 30 secs.).
Keep pressing on the button to change the numbers more quickly.
The countdown will start a few seconds after the timer has been set; it remains visible at all times on the display.
It is possible to cancel the programming of the timer
When the time is up, the timer bleeps (the display indicates 0.00).
Stop the bleeping by pressing any button
Nb :
T H E L A Y O U T O F T H E C O N T R O L P A N E L
Cooking for a specific length of time with a set time for the end of cooking
Using the timer
7
