Kleenmaid OMFE6010, Инструкция по использованию и гарантийные обязательства, Страница: 9 / 24

9
This is the mode that the oven is normally in every time that there is a power failure and, consequently, when
it is first hooked-up.
The purpose is to show how you can control it with a recorded sequence of commands.
In this mode, the oven is
NEVER really turned on, i.e., the heating elements are never powered!
The control panel is INACTIVE and, so, the oven will not respond to commands!
To disable the demonstration mode, touch the light symbol for
five seconds: the oven will go to normal operation and be
ready for turning on.
Now you can set the time but it is not necessary for turning
on the oven.
SETTING THE CLOCK
The oven will signal that it is connected to the power mains with a double beep.
To set the system time, press the “TIMER FUNCTIONS” key for at least 3 seconds.
Each command activated is confirmed by a beep
Set the clock with the + and - keys: during setting the separator dots
flash, the time has been set when the dots remain steady on.
DEMO MODE
NEW OMFE6010 60CM OL FA.indd 9 NEW OMFE6010 60CM OL FA.indd 9 22/08/11 12:48 PM 22/08/11 12:48 PM