Kleenmaid OMF6014, Инструкция по использованию и гарантийные обязательства

Страница: 11 / 20

disappears until the time cooking starts.
You can set a time up to 23.59 hours after the time obtained by adding the cooking period
The oven will start operating at the time calculated by deducting the cooking period from the set finishing
time and will stop at the set finishing time The timer will give an audible warning and the symbol A on
the display screen will begin to flash
.
After turn ing the cooking function and oven temperature to
position pressing any button for less than 3 seconds will stop the audible warning.
Pressing" " for more than 3 seconds set s the oven to Manual mode again to use the oven.
Please note Once full automatic mode
is set
the time cannot be changed To change the duration or end
times reset the automatic mode by performing the steps above again.
General Notes:
utton to confirm, the
The symbol
button until you see D ur on the timer screen Use button s to adjust the cooking
button to confirm,
will appear on
the timer screen,
u se " +" "- " button s to adjust finishing time .
Press "
will appear on the screen and the symbol
A will display continuously on the screen
button until you see End on the timer screen When you see End on
" b
1> Long pres s on or for more than seconds the time will progressively and rapidly increase o r
decrease
2> When the time functions are being set,
if t h ere is no operation for 5
m inutes then the oven will
return to manual mode.
!
When setting each of
the current setting and
the ti me f unctio n s , pr
essi ng o n
the oven enters manual mode.
for more than 3 s
econds will cancel
fo r mor e tha n 3 se co nd s
a beep sound s ,
First
Press
period for the food you wish to cook . Press
the screen and the symbol A will display continuously on the screen.
Second
keep pressing the
!
During time functio n setting pressing on
DQG
the cur r en t time function
setting is cancelled and the oven enters standby mode.
!
It is recommended to run the oven elements for minutes at degrees to burn off any
residue from their surfaces
6> If the unit is not in use, always set the knobs to "0".
Full Automatic Programming :
This function is used to cook at a later time with a set duration The food to be cooked is put into the oven
The oven is adjusted to the desired cooking function and the oven temperature is adjusted to the level
suitable for the food to be cooked To set the duration and end times:
knobs
the
current time
current time
to the current time of day.
11