1
1
Position
the
drain hose properly,
or
damage m
ay
result
from
water leakage.
During the initial empty cycle (see
p14) c
heck for water leakage
from the drain
outlet/drain hose and tighten the hose clamp if necessary.
Do not
kink
, crush
or
stretch
the drain hose.
Trough
Hose
Retainer
Bind
Min.86cm
Max.100cm
Min
.
86cm
100
cm
Max
.
1.
Check if the
feet
are closely attached to
the cabinet. If not, turn them to
their
original position
by
tighten
ing
the nuts.
2.
Check alignment of the product with a
spirit level and
adjust
if required
.
3.Loosen the lock nut and turn
each
f
oo
t
until it closely contacts with the floor.
4.After
locking the feet properly pre
ss
on
all
four
corners to ensure the
feet have
been adjusted
correct
ly.
• The
lock nuts
on all t
he
feet must
be
screwed
firmly
against
the
housing.
Levelling the washing machine
Warning!
INSTALLATION
Installation of drain hose
1.
Connect the end of the supplied drain hose to the drain outlet on the
lower back of the washing machine.
2.Fix and tighten it
firmly with the supplied hose clamp.
See f
igure on
right.
Lock
nut
foot
right
wrong
Raise
Lower
lock
loosen
See
the
diagrams below for min
imum
and max
imum
height
s
for positioning
the drain
hose.
Ensure
the drain hose is not kinked, crushed or stretched.
Positioning
of drain hose
