21
11/ PROGRAMMING
•
Delaying the end of a
programme
Programme the finishing time, in quarter of an
hour stages, by pressing the +
+ or
–
–
buttons
until you reach the desired time.
Confirm
by pressing
“Start”
.
The screen counts down hour by hour until
the programme starts.
•
End of the programme
The light flashes 15 minutes before the end of
the programme and then lights permanently
once the programme has finished.
•
Cancelling a programme
Hold down the “Start/
Cancel
”
button for a
few seconds; the screen shows the pro-
gramme finishing time and, two minutes later,
the current time.
You can reprogramme.
•
Stopping the appliance
When the programme has finished, press the
“On/
Off
” button
.
•
Setting the audible signal
The setting enables you to activate or de-acti-
vate the beep at the end of the programme.
— Access the setting by holding down the “Set”
button
until you hear a double signal (long
beep). Keep on pressing “Set” successively until
you have access to the parameter:
The setting is confirmed automatically after 10
seconds or by pressing “Set” (switching to the
next parameter “Screen brightness”).
D
D
A
A
G
G
G
G
F
F
Waiting for delayed start
Programme time remaining,
progress
End of programme
Beep activated
Beep de-activated
