Kleenmaid DW29 W, Инструкция по использованию и гарантийные обязательства

Страница: 10 / 36

10
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER
• FOR TRADITIONAL PRODUCTS
• Your machine must be specially adjusted to use traditional products.
• FOR MULTI-PURPOSE PRODUCTS
• Your machine can be specially adjusted to use multi-purpose products if
the water hardness is < 25°F.
— This is set using the “ D De ella ayye ed d S Stta arrtt ” button; a long press on the button provides access to the
menus. The screen shows
Set
to indicate that you are in Setting mode.
— Press “Delayed Start” successively to alter this setting (to suit the hardness of the water). Each
press adjusts the setting.
— To use multi-purpose tablets, you must alter this setting. To do this, use brief presses on the “Delayed
Start” button to select
c0
or
c1
, depending on the water’s hardness.
NB:
For better coverage of the variety of multi-purpose products available, your dishwasher’s
“4-in-1” option has two possible settings
1) “Extra Dry”
(factory setting) improves drying results in the event of lower performance from the type
“2-in-1”, “3-in-1” or “4-in-1” multi-purpose product.
2) “Sparkling Clean”
prioritises the brilliance of your items, whatever the type of multi-purpose
product used.
• Proceed to set the “ ” option, if necessary
— Press the “Delayed Start” button to select “Sparkling Clean”.
— Press the button again if you wish to return to “Extra Dry”.
— The setting is validated automatically after 5 seconds if the “Delayed Start” button in not pres-
sed again.
— Refer to the table below.
• Proceed as follows to adjust the water softener on the control panel:
— This is set using the “ D De ella ayye ed d S Stta arrtt ” button; a long press on the button provides access to the
menus. The screen shows
Set
to indicate that you are in Setting mode.
— Press “Delayed Start” successively to alter this setting (to suit the hardness of the water). Each
press adjusts the setting.
— The setting is validated automatically after 5 seconds if the “Delayed Start” button is not pressed again.
— Refer to the table below.
Factory setting:
c c3 3
.
T Te es stt s sttrriip p h ha arrd dn ne es ss s T Trra ad diittiio on na all p prro od du uc ctts s M Mu ullttii--p pu urrp po os se e p prro od du uc ctts s
0 - 10°F
10 - 25°F
25 - 40°F
40 - 55°F
55 - 70°F
> 70°F
S So offtte en ne err s se ettttiin ng g
“Extra Dry”
(factory setting)
“Sparkling Clean”
“Extra Dry”
“Sparkling Clean”
c0
cI
c2
c3
c4
c5
c0
c0
cI
cI
: Light permanently lit
: Light flashing