TROUBLE SHOOTING
Fault
Cause
Solution
Light on, but
motor does not
work
The blades are blocked.
The capacitor is damaged.
Contact Service Department
The motor is damaged.
Contact Service Department
The internal wiring of motor is cut off/
disconnected. An unpleasant smell
may be produced.
Contact Service Department
Both light and
motor do not
work
Apart from the above mentioned, check the following:
Light damaged.
Replace lights.
Power cord loose.
Contact Service Department
Oil leakage
Outlet and the air ventilation entrance
are not tightly sealed.
Seal the duct connection with appropriate
sealant.
Vibration
The blade, if damaged, can cause
vibrating.
Contact Service Department
The motor is not tightly fastened.
Contact Service Department
The rangehood is not tightly fixed.
Fix the rangehood tightly.
Insufficient
suction
The distance between the range-
hood and the cooktop is too large.
Readjust the distance. according to
installation instructions.
Too much ventilation from open doors
or windows.
Choose a new place to install the
appliance or close some doors / windows.
The
appliance
inclines
The fixing screws are not tight
enough.
Tighten the fixing screw and make it
horizontal.
The hanging screws are not tight
enough
Tighten the hanging screw and make it
horizontal.
Check the blades.
13
