Kleenmaid CH805CE-1, Инструкция по эксплуатации

Страница: 9 / 24

172736
• Once the hob is switched on with the ON/OFF sensor, within
the next ten seconds, while the indicators are illuminated, you
have to switch on a particular hotplate by touching the
(-) or (+)
sensors for the selected hotplate and set the desired heating
power. If the power setting is not selected within the next
ten seconds, the
“0” indicator turns off and the hotplate will
automatically be switched off.
Setting of cooking level
• As long as the indicators are lit the heating power (1...) may
be selected and altered accordingly by pressing the (-) or (+)
sensor. By the (+) sensor the power is gradually increased to
the maximum level (9), while with the (-) sensor it is reduced
back to “0” (hotplate is switched off). In case you start the
setting by pressing the (-) sensor, the heating power starts
from the level “ 4 ” , and if you start the setting by pressing the
(+) sensor, the heating power starts from the maximum level
“9•” , simultaneously starting the automatic cooking mode
(see Automatic cooking mode). When one hotplate is on, the
“0” sign on other hotplate indicators is off. If you wish to start
another hotplate, press either the (-) or (+) sensor, and the “0”
mark appears on the indicator. Now press the (-) or (+) sensor
again and select the heating power.
• When the automatic cooking mode is activated the hotplate
will operate at maximum power for a limited period of time
(depending upon the power level required for continuation)
and then automatically switch to the reduced power level to
resume cooking (see chart). It may be switched on in any of
the hotplates for all power settings except for maximum setting
“9” .
• By touching the hotplate (+) sensor switch the hotplate on. The
display indicates power setting “9” and the decimal dot (•) .
Within the next ten seconds press the (-) sensor and select the
power setting (8...1) for cooking. The decimal dot is on for the
entire time this function is on. By touching the
(-) or (+) sensor
you may vary the heating power at any desired moment. If no
power setting for further cooking is selected within the next 10
seconds the automatic cooking mode is switched off and the
decimal dot disappears.
• Once the time from the above chart expires, the function is
switched off and the decimal dot disappears.
Cooking automatics can be tupned off at any time with (-)
sensor, by setting cooking level to “0” .
9
Switching the hotplates
on
Automatic cooking mode
172731_en.indd 9 172731_en.indd 9 9.1.2007 14:52:02 9.1.2007 14:52:02