4
DOOR ADJUSTMENT AND REMOVAL
ADJUSTMENT:
You may find that adjustment is needed with the
hinges to line up the door properly. Using a Phillips
screwdriver you can adjust the hinges in six
directions.
A) To adjust the door up and down in height, rotate
the same adjuster in the center of the mounting
plate as shown in the illustration.
B) To adjust the door in and out in depth, rotate the
same adjuster on the front of the mounting plate
as shown in the illustration.
C) To adjust the door left and right, rotate the
screw on the back of the mounting plate as
shown in the illustration.
You many have to make adjustments to both
hinges (top and bottom) on the door to see results.
REMOVAL:
To remove the door, press down on the base plate
clasp inside the cabinet box to release the door
hinge from the base plate. You may have to wiggle
the hinge slightly to remove it from the base plate.
To remove the hinge from the door, use a Phillips
screwdriver to loosen the hinge cup from the bore
hole.
C-
left/right adjustment
A-
up/down adjustment
B-
in/out adjustment