23. OUTPUT
:
(23)
Provide for connection of external 8ohms speaker cabinet.
24. OUTPUT
:
(24)
Provide for connection of external 4ohms speaker cabinet.
NOTE: NOTE:
The way connect with speaker
(1)
Connect three speakers at same time, The impedance of each speaker must 12 ohms
(2)
Connect with two speakers in the meantime, If you use INPUT 24 and 23 (4ohms and 8 ohms), The impedance of each speakers
is 4 ohms. If you use INPUT 23 and 22 (8 ohms and 16ohms),The impedance of each speakers is 8ohms
(3)
If you only connect one speaker, please connect according to the impedance.
S
S
S
SPECIFICATIONS
PECIFICATIONS
PECIFICATIONS
PECIFICATIONS
POWER AMPLIFIER SECTION
2x6L6 ’s with 12AX7 driver
Rated Power &Load
15w RMS into 8, 4 ohms
Power @Clipping(Typically)
(5%THD,1KHZ,120vAC line) 15W RMS into 8 ,4ohms(Bias must be reduced to measure)
Frequency Response:
+0,-2db,50HZ to 15KHZ,@, 20w RMS into 16 ohms
Hum &Noise:
Greater than 80 db below rated power
Power consumption:
150wtts 50/60HZ.120Vac(domestic)
PREAMP SECTION
2-12AX7’s
The following specs are measured @1KHz with the controls present as follows:
Pre @0
Reverb Level @0
Bass &Treble EQ @12
Middle
EQ@0