KLD GT-20H(M), Руководство пользователя, Страница: 2 / 11

Intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
Intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product
CAUTION
Before you “ON” GT-20HM, please ensure it has been connected with speaker. If not, it will damage tube and transform .
CAUTION
Risk of electrical shock –DO NOT OPEN!
CAUTION
To reduce the risk of electric shock, do not remove cover. No User serviceable parts inside. Refer servicing to qualified
service personnel.
WARRING
To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this appliance,
read the operating guide for further warnings.
Congratulations
on your purchase of the GT-20H.This is newest production of Kailing electronic Co.,Ltd( http://www.kldguitar.com ).
3 12ax7 being preamp design and 2 EL 84 being power amplifier, they allow quick variation of tone-from vintage blues to modern
hard-rock and grunge tones. The boost switch is particularly useful in obtaining the more traditional “cranked-amp” tones without the
harshness generated by sending too much low end to the power amp. The 20 watt power level is just the right amount for power amp
chunk and sustain at a reasonable volume.This head provides all the extra gain you'll ever need. Classic Gain and Ultra Gain channels,
both with 2 modes that can take you from warm, clean tube tones to the souped-up threshold of sonic danger. A Deep switch adds a
resonant bass boost for a meatier bottom end and a Tone Shift scoops out the mid frequencies making it ideal for heavy metal tones.
Two particularly modern additions to this amplifier are the reverb and effects loop. The reverb unit is the long-spring type found in most
guitar amps since the 50s. The effects loop comes in especially handy when used with delay, chorus, and many other effect unit, rack
or stomp box-when you don’t want the associated noise of connecting them in-line with the amp
FEATURES
Power transform 108w
Tubes: Two EL84s and three 12AX7s