(NOTE: Cords from amp and to speakers must be heavy-duty speaker cable with
1/4" phone-type speaker connectors.)
1.
LINE LEVEL
Line level adjuster
：
-20dB-Min.
2.
LINE OUT
6.35 Line out jack, connected with recording gear. There is dummy load let
customer record in silence.
3.
INPUT
6.35 jack
；
Connect a speaker cable from this jack to your amp's speaker out jack.
The impedances of two jacks are same.
4.
OUTPUT
6.35 jack
，
Connect a speaker cable from this jack to your speaker cabinet. It
is optimal to match your amp speaker out to the external speaker rating. ( ex :
8 ohm speaker out jack on amp with 8 ohm speaker cab.)
I
MPORTANT: WHEN USING JUST ONE OF THE SPEAKER OUTPUTS
FROM THE AT100. THE SPEAKER CABINET SHOULD MATCHED SAME
IMPEDANCE AS THE AT 100
.
5.
HEADPHONE
6.35 Headphone jack with dummy load.
6. 0dB—6dB—12dB ATTENUATION
0 dB—True Bypass .
-6—6dB attenuation.
-12—12dB attenuation.
7
．
．
．
．
∞
- 12 dB ATTENUATION
This is a rotary switch that selects the amount of attenuation .Output signal can
be attenuated from -12dB to silence continuously. The knob work after No.6
knob turned on -12 dB.
8
．
．
．
．
BRIGHT COMPENSATE
This is a rotary switch that compensates brightness of sound. There are three
steps, please use it with EQ in amp together.
7
1
2
3
6
4
8
5
9
