D O O R H O L D E R U S E R G U I D E
2
Specification
Mounting and Wiring
Electrical Data
Power Supply:
230Vac 50Hz
Current Consumption:
0.5A
Protection:
RF Data
Operating Frequency:
868.9MHz
Transceiver Range: 50m to 100m depending on the building
Receiver Type:
2 stage superheterodyne receiver architecture
Mounting the Controller: The controller will need to be located beside the host fire alarm panel (or alternatively, near a 24V alarm
signal device, e.g. sounder or beacon, with convenient mains power)
Use the 4 screws provided and follow the dimension layout given above. Securely fix the controller to the wall but take care not to
distort the case back.
Location of knockouts for cable entry
Location of knockouts for cable entry
Loosen the two screws on the front of the
controller to expose the mounting features.
230mm
160mm
