1. General
Klaxalarm is a primary battery (LR14 C Cells qty 6) operated self-contained fire
alarm. The intended use is for protection of small or temporary buildings.
The Terrier Klaxalarm incorporates a re-settable manual call point and an
electronic sounder with a choice of three tones. The products may be interlinked
with a 3 core cable so that if one unit is activated all the other units will sound
simultaneously. Additional Manual Call Points can also be connected to the units.
2. Installation
Use three screws at the rear of the Klaxalarm (not supplied)
3. Operation, Testing and Maintenance
The unit is ready for operation as soon as the battery is connected. The unit
should be periodically tested for correct operation.
To test the alarm, simply press the centre of the transparent plastic window of the
call point. The alarm should sound and a yellow indicator appears in the window
to show that the call point has been activated.
The unit is reset after an alarm or test by inserting the black plastic key in the slot
on the front of the unit and turning clockwise. The yellow indicator disappears
when the unit has reset.
Each unit will operate in the standby mode for over twelve months. A low battery
warning beep is emitted when the battery starts to fail. Ensure the battery is
replaced promptly to ensure continued protection.
