Instruction
manual
THK
22
page
14
_____________________________________________________________________________
Attention
Even if the code number is identical only those dies should be used which are
suitable for the material.
5.4. Service and maintenance instruction
The hydraulic tool must be cleaned and dried after each use. The tool is maintenance free.
After one year we recommend sending the tool in to the manufacturer for an inspection.
5.5. Reference as to which spare parts can be exchanged by the customer
Within the determined use of the tool only the dies (Pos.-No. 1) are permitted to be changed
by the user.
Do not attempt to repair the tool yourself, and do not remove any parts such as screws and
other components.
6. Troubleshooting
- The tool loses oil.
=>
Return the tool to the manufacturer. Do not open the tool.
7. Technical Data
Crimping
force:
60
kN
Weight of the complete tool:
approx. 8,8 kg
max. operation pressure:
700 bar
height:
245
mm
width:
160
mm
(Ground
plate)
depth:
120
mm
Symbols
Safety warnings
Please do not disregard these instructions in order to avoid human injuries and
environmental damages.
Operational warnings
Please do not disregard them to avoid damaging the pump unit.
Note
Additional copies of this manual are available without charge. The part # is HE.8224_B.
