Klarstein Hot & Hot, Руководство пользователя

Страница: 33 / 48

33
EN
TROUBLESHOOTING
Problem Possible Reason Solution
Gas leaking from
cracked/cut/
burned hose
Damaged hose Turn off gas at LP tank,
if hoes is cut or cracked,
replace hose.See LP tank
lead test and connection
regulator to the LP tank
Gas leaking
from LP tank Mechanical failure due
to resting or mishandling Turn off LP tank valve
Gas leaking from
LP tank valve
.Failure or tank valve
from mishandling or
mechanical failure Turn off LP tank valve. Re-
turn LP tank to gas supplier
Gas leaking between
LP tank and regula-
tor connection
Improper installation,
connection not tight,
failure of rubber seal Turn off LP tank valve,
remove regulator from
cylinder and visually
inspect rubber seal for
damage, see LP tank
test and connection
regulator to the LP tank
Fire coming through
control panel
Fire in burner tube
section of burner due
to partial blockage Turn off control knobs
and LP tank valve.
After fire is out and grill
is cold, remove burner
and inspect for spider
nests or rust. see natural
hazard and cleaning the
burner assembly pages.
Grease fire or
continuous exces-
sive flames above
cooking surface
Too much grease
buildup in burner area Turn off LP Tank. Leave lid
open to allow flames to
die down. After cooling,
clean food particles
and excess grease from
inside firebox area,
grease cup/pan/tray,
and other surfaces