17
EN
Electric floor brush and unit suction inlet connection
1. Push electric floor brush round mouth into the inlet within the host , ensure tight
without loose, after hearing the clicks, electric floor brush installed in place.
2. If you want to remove the electric floor brush, one hand hold the electric floor
brush to release button, the other hand hold the electric floor brush and remove the
outward.
Charging the battery
• Connect the charger cable to the unit as shown in the illustration and plug the
charger into the wall outlet. The unit will start charging automatically.
•
If the charging indicator flashes green, this means that the battery is still charging.
If the charging indicator is permanently green, the battery is fully charged. If the
green light goes out, this means that the battery status is reduced. This may cause
the unit to malfunction. When the charging indicator starts flashing red, the unit must
be charged.
NOTE: Remove the vacuum cleaner pipe before charging.
Power indicator