• When using this electrical appliance, basic precautions should be followed to reduce the risk of
fire,electric shok,and injury to person,including the following:
• This heater must be used on an AC supply only and the voltage marked on the heater must cor-
respond to the supply voltage.
• Do not switch the appliance on until it properly installed as described in this manual.
• The heater must not be located immediately below a socket outlet.
•
Keep furniture, curtains and other flammable material at least 1 metre away from the
• appliance.
• This appliance is intended for household use and should not be used for industrial
• Purposes.
• From time to time, check the cord for damage. Never use the appliance if the cord or
• any part of the appliance shows signs of damage.
• Do not operate this appliance with a damaged plug or cord, after a malfunction or after
• Being dropped or damaged in any way.
•
Repairs to electrical appliances should only be performed by a qualified electrician.
• Improper repairs may place the user at serious risk.
• Do not allow the mains cable to hang over sharp edges or come into contact with hot
• surfaces.
• Do not cover or obstruct the heater in any way.
• Overheating will result if it is accidentally covered.
• Never immerse the product in water or any other liquids.
• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
• Do not use the appliance outdoors.
• Do not use if you have wet hands.
• Never use the appliance on or near hot surfaces.
• Before cleaning the appliance, ensure it is unplugged from the power and that it is completely
cooled.
• Do not clean the appliance with abrasive chemicals.
• Never use accessories that are not recommended or supplied by the manufacturer. It
• could cause danger to the user or damage to the appliance.
• The only user replacement parts are the bulbs. There are no other user replacement
•
parts. All other servicing should be referred to a qualified engineer.
• This appliance is not intended for use by persons (including children) with reduced
• Physical, sensory or mental capabilities, or lack of experience and knowledge unless
• they have been given supervision or instruction concerning use of the appliance by a
• person responsible for their safety.
• Chilidren should be supervised to ensure that they do not play with the appliance.
introduCtion
Unpack the heater carefully and retain the packaging for possible future use.
A choice of 1kW or 2kW heat output is provided by the heater, which is located at the bottom of the
heater.
Before connecting the heater check that the supply voltage is the same as that stated on the heater.
Note: Used in an environment where background noise is very low, it may be possible to hear a sound
which is related to the operation of the flame effect. This is normal and should not be a cause for con
-
cern.
opEration
WARNING :THIS APPLIANCE MUST BE EARTHED
The heater controls are located behind the metal plate on the front of the heater. Four switches provide
a choice of heat settings.
6
