Klarstein 10041826, Руководство пользователя

Страница: 59 / 168

59
EN
ENERGY SAVING RECOMMENDATIONS
• Pre-rinsing dishes leads to increased water and energy consumption and is not
recommended.
• Washing dishes in a household dishwasher usually uses less energy and water
than washing by hand when the household dishwasher is used according to the
instructions.
SETUP AND OPERATION
Starting the washing process
1. Pull out the lower and upper baskets, load the dishes and push the basket back in. It
is recommended to load the lower basket first and then the upper basket.
2. Fill in the detergent.
3. Plug the power plug into the mains socket.
4. Make sure that the water supply is set to full pressure.
5. Open the door and press the power button.
6. Select a programme, the indicator light lights up. Close the door and the
dishwasher will start its programme.
Changing the programme
A programme can only be changed if the appliance has only been running for a short
time. Otherwise, the dishwashing detergent may have already been released and the
dishwasher may already be full of water. If this is the case, the machine will need to be
reset and the dispenser will need to be refilled with detergent. To reset the dishwasher,
proceed as follows:
1. Open the door a little to stop the dishwasher. After the spray arm has stopped
working, you can open the door completely.
2. Press the programme button for more than three seconds to enter the programme
selection mode.
3. You can change the programme to the desired cycle setting.