38
EN
FIXING THE WINDOW SEAL
Fixing the sealing frame for sliding windows
The sliding window sealing frame is designed to fit most standard vertical and horizontal
windows. However, you may need to change some aspects of the installation for certain
types of windows. The sealing frame can be fixed with screws.
Vertical sliding windows
Horizontal sliding windows
Note:
If the window opening is smaller
than the minimum length of the gasket
frame, cut the end on the other side of
the air outlet short enough for the gasket
frame to fit into the window opening.
Never cut the hole.
Adjusting the sealing frame for sliding windows
Slide frame (B) into frame (A) and adjust
the size of the frame to the width of your
window. Lock the locking screw (C) in
the holes corresponding to the measured
width to ensure that there are no gaps
or air pockets between the window and
sealing frame after installation.
If necessary, trim on this
side.
Sealing frame
Sealing frame