22
EN
INSTALLATION
Installation Notes
Warning: Danger of fire
Do not install the appliance close to curtains and other
combustible materials.
•
This heater must be installed by a qualified person, that is, a qualified electrician.
• Before installation and during installation, ensure that the heater is always discon-
nected from the power supply and is in a cool state.
• The heater can be installed horizontally or vertically.
• When installing the wall and ceiling machine, the minimum point of the heater must
be higher than 1.8 meters from the ground, ensuring that the heater can not be
touched directly during operation.
• When installing in a horizontal or ceiling, do not place the heater at an angle of
more than 90 degrees, or below 45 degrees.
• If the heater installation angle is vertical or close to vertical, make sure the power
cord is always under the heater.
• During the use of the heater, there is a certain increase in the temperature of the
heater body. Make sure that the power cord never touches the heater body and is
away from the heater housing.
•
Do not install heaters on the surface of any flammable materials.
• When installing the heater, make sure that the distance between the heater and the
surface of the flammable material is always not less than the minimum safe distance.
•
Make sure the heater is always at least 0.5 m wide from the ceiling and adjacent
walls.
•
If you want to use the heater outdoors, use a weatherproof, qualified outlet.
• Make sure there are no wires or water pipes in the area where the heater is installed
before drilling.
• The heater must be installed on the mounting bracket provided by the manufacturer
(see Figure A).
