Klarstein 10031996, Руководство пользователя, Страница: 24 / 64

24
EN
Step 5 Step 6
To lift and hood body by 2 persons to
near the opened hole in the ceiling,the
third person insert power plug into the
power socket which is prepared firstly.
Lift the hood into the hole opened
before,then adjust the screw of 4
bayonets until the hood body is aligned
with the ceiling, make sure 4 bayonets to
get stuck the wood frame installed inside
of ceiling at same time,and make sure not
loose from all sides.
Step 7 Step 8
Lift the guide panel to the body of hood
by 2 persons,connect wire of switch and
LED light,then adjust the screw holes in
guide panel to be aligned with the nuts
on range hood body,then fix 6 screws
tightly.
Close the guide panel then installation is
finished,turn on switch by remote control
as instruction on the user manual.