Klarstein 10031337, Руководство пользователя

Страница: 20 / 60

20
Manipulating of battery protector(Low voltage protection)
• While the battery's voltage drops to the setup data,freezer’s compressor will stop working. so as to protect
the battery against over discharge;Once the battery’s voltage reaches the restart data after charging,
freezer’s compressor will start immediately.
• While the battery's voltage is too low, battery protector will take effect.Red malfuntion indicator light will
blink. Now you need to charge the battery.
• While the battery protector cut off the battery connection,you should warrant the battery to be charged
sufficiently, so as avoid frequent restarting of compressor.
• Counterpart volatage form for Gear of battery protector.
Counterpart volatage form for Gear of battery protector
Power supply Status of battery
protector
Low mode (LO) Middle mode (MED) High (HI)
DC 12 V
Cutting-off Volt-
age
10,1 ±0,3 V 11,4 ±0,3 V 11,8 ±0,3 V
Restaring Voltage 11,1 ±0,3 V 12,2 ±0,3 V 12,6 ±0,3 V
DC 24 V
Cutting-off Volt-
age
21,5 ±0,3 V 24,1 ±0,3 V 24,6 ±0,3 V
Restaring Voltage 23,0 ±0,3 V 25,3 ±0,3 V 26,2 ±0,3 V
• If you use aoto power for starting the battery power, HI gear is proposed,so as to warrant that vehicle's
battery power is in high level.
• If you use additional battery for power supply, LO gear is applicable.
If you use AC/DC adapter(External Adatper)for power supply, please set the battery protector to LO
gear.
• Freezer is designed to have the function to rework when connect to power after p ower off. If the freezer
is shutdown under abnormal situation, it will work automatically when connect to power again.