5
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the
instruction manual are not covered by our warranty and any liability.
Technical Data
Item number
10030282, 10030283, 10030284, 10030285
Power supply
220-240 V ~ 50-60 Hz
Safety Instructions
General Hints
• Read all the safety and operating instructions carefully and retain them for future reference.
• Do not put hot food inside the freezer.
• Wrap all food items with a plastic protection film to avoid dehydration and lose food flavour.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or men-
tal capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Young children should be supervised to ensure that they do not play with the appliance.
•
If the supply cord is damaged it must be replaced by the manufacturer，its service agent or similarly qualified
persons in order to avoid a hazard.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• Do not damage the refrigerant circuit. Do not use flammable appliances inside the food storage compart-
ments of the appliance, unless they are of the type recommended by the manufacturer.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those re-
commended by the manufacturer
• If you do not use the freezer for a long period of time, disconnect power, clean the inside parts, put the
freezer in a dry area and leave the door slightly open. The product is for household use only.
Unpacking, Repacking and Moving
• Unpacking: Just cut off the packing band, then pull the carton up.
• Repacking: Please remember to put the original foamed pads in place.
• Moving: Be sure freezer stays in upright position during moving it. Do not tilt it for more than 45°from up-
right. Never upset it. Do not apply force on any external part such as pipe, condenser, door and its handle
for moving, freezer must be well packed and secured in long distance transportation to avoid damage from
impacting and or great rocking.
Placement
The freezer should be placed on a flat and solid-top surface. It should be kept away from sunlight, heat source,
humid or mess place. The freezer should be kept away from the wall for a proper space for good air circulation.
When the freezer is placed in a cupboard, the rear of the cupboard must be removed out for good circulation.
