Klarstein 10026970, Руководство пользователя

Страница: 21 / 24

Care and cleaning
WARNING
You must DISCONNECT the appliance from the electric supply, befor you can carry out any
cleaning or maintenance work.
External cleaning
• Use only soap water an then dry thoroughly.
• Important: do not use menthylated spirit, diluents or similar products
Cleaning the door
Clean periodically the interior part of the door to remove any fl uff. Accura-
te cleaning ensure correct drying.
Cleaning the fi lter
Your dryer will only function well if the fi lter is cleaned. The fi lter collects
all the fl uff which accumulates during drying, to operate at optimum effi ci-
ency. Filter indicator light reminds you, they must therefore be cleaned.
The fi lter must be removed for cleaning. When drying, all fi bre clothing are
unhairing, dryer through the fi lter collects all the fl uff. When this pheno-
menon happened, please use brush and dipped warm water to clean fi lter
Cleaning the condenser
Water container collects all of the water from condenser. Water container
need to be emptied after every drying cycle. If the water container is full,
an active programme will break off the light will comes on and the buzzer
sounds automatically. In order to continue the programme, the water con-
tainer must fi rst be emptied.
1. Pull out water container
2. Tip water into pool
3. Pull the water container in dryer
4. Press the Start/Pause button
Cleaning the condenser
Condensor is one of the very important assembly to realize effective drying. Therefore it needs spe-
cial attention. Suggest you clean the condenser three or four times in every year.
1. Open condensor cover.
2. Move three pieces of
lock rod, pull out the
condensor.
3. Put the condensor un-
ter the tap make water
through completely by
clean condensor.
4. According to installation of opposite direction.
20 21