11
Troubleshooting
Warning
Possible cause
Solution
E0
An unsuitable pot/pan is on the induction
zone or the diameter of the pot/pan is less
than 12 cm.
Place suitable cookware on the cooktop.
E1
Bad connection of the induction hob/ faulty
electrical circuit.
Contact an authorized service center.
E2
Problem with the temperature sensor.
Contact an authorized service center.
E3
Voltage is too high.
Check the power source, turn on when the
power source returns to normal.
E4
Voltage is too low.
Check the power source, turn on when the
power source returns to normal.
E5
Protection against overheating - the cooktop
is too hot.
Wait few minutes until the appliance cools;
check the pot/pan.
E6
Problem with the fan, the air in-take/outflow
is blocked.
When the appliance cools down, clean the
openings. Afterwards, restart the appliance. If
the problem persists, contact an authorized
service center.
Hints on Disposal
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
Declaration of Conformity
Producer
: CHAL-TEC Vertriebs- + Handels GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2004/108/EC (EMC)
2011/65/EU (RoHS)
2006/95/EC (LVD)
Содержание 10012196
Страница 1: ...10012196 Induktionskochfeld ...
