1. Open Dante Controller.
2. Go to Routing tab and double click on your sound source. Go to DEVICE CONFIG tab
and choose preferred sampling rate.
3. Close the window.
4. Now do the same for KLANG:quelle and use the same sampling rate.
Note: Dante devices can only be connected if they run at the same sampling rates.
Step 5: Routing
Connect (stereo) audio stream from sound source to KLANG:quelle Out Left and Right.
Read more on how to route audio between Dante products.
Step 6: Enjoy Listening
Connect your favourite headphones and adjust gain and volume control.
Congratulations, you are ready to enjoy crystal clear audio with KLANG:quelle!
Important Information
Audinate® Dante™ is a sophisticated audio network protocol for the professional
transmission of audio with a multitude of channels, high sampling rates and it can also
provide redundancy.
4/8
