Dante Breakout and Headphone Amp – Quick Start Guide
klang.com/blog/products/klangquelle
KLANG:quelle | Quick Start Guide
Quick Start PDF Download
Download KLANG:quelle 19″ | Quick Start
Manual PDF
Download KLANG:quelle (compact) | Quick
Start Manual PDF
We will show you how easy it is to setup
your new Dante enabled headphone amplifier
KLANG:quelle. With these
6 simple steps,
we
will guide you through Dante tools installation
and audio routing so that you can enjoy
listening to your music with your favourite pair
of headphones in a quality you have never
experienced before.
What you need
1. PC or Mac (with Ethernet port or adaptor)
2. KLANG:quelle + Power Supply
3. Network cable
4. Dante Virtual Soundcard
5. Dante Controller
6. Music Player and tunes on your computer (iTunes, Cuppertino VOX, WinAmp,
Windows Mediaplayer…)
The Device
KLANG:quelle is available in either a compact house (approx
⅓
of 19″ rack mount format)
and in a 19″ rack mount with 8 additional XLR line level outputs.
The front has Volume Control knobs, TRS (tip ring sleeve) jack connectors (stereo, 6.3mm), a
Gain switch (–12dB | 0dB | +12dB) and a signal strength LED (green/red) for each of the four
independent stereo headphone channels.
1/8
