USER MANUAL | KLANG:fabrik & KLANG:vier
14
© KLANG:technologies GmbH, Aachen, Germany, 2014 | All rights reserved | V0.1.6– 6-Oct-15
8 LOAD & SAVE USER SETTINGS
CHANNEL SETTINGS
•
Let’s assume the instrument audio streams are arriving at KLANG:fabrik / KLANG:vier and the routing is already correct
for the purpose. We want e.g. to have 8 individual users and 24 pre-configured input channels (default).
•
Open KLANG:app 2
, switch to
administrator or engineer/technician mode
.
Name all channels, choose an icon and deactivate all unused channels. Link stereo channels to clean up the appearance.
Position the instruments on the i3D or 3D orbit mainly. For bass drum or bass a mono setting inside the head might
be sufficient as the human ears have difficulties locating low frequency content.
SETTINGS FOR THE USER
•
For musicians, use the
musician mode
, but log into technician mode first to setup the system correctly.
•
Under
CONFIG
choose a user.
•
Then switch to musician mode by pressing and holding the
CONFIG
button for more than
5 seconds
.
•
On iPad you can ensure that no other app is used by switching the iPad to Kiosk Mode. E.g., for iPad click 3 times quickly
on the home button to enter. Check your operating system for similar feature if needed.
•
Please note: Remember the password, this is really important to quit the mode later on!
•
Please consider connecting the remote device to a power supply to avoid unwanted power off. The use of professional
smartphone or tablet holder is suggested.
