manualshive.com logo in svg

KLA Tencor P-16+, Руководство пользователя

Поделиться
Скачать
KLA Tencor P-16+ Скачать руководство пользователя страница 176

XY View Screen - Using Die Grid Navigation (Optional Feature, P-16+ only)

KLA-Tencor P-16+ / P-6 User’s Guide 

4-28

KLA-Tencor Confidential

0142530-000 AB

3/13/09

Clearing a Die Grid (Turn OFF Die Grid Navigation)

4

1.

Go to the 

Teach Scan

 window. 

2.

Click the 

Die Grid

 menu, and select 

Clear Die Grid

. (See 

Figure 4.23

.) 

Standard navigation is active again.  

Navigating Across the Wafer Using the Die Grid 

4

1.

Load a die grid using the procedure in 

Loading a Die Grid (Turning ON Die 

Grid Navigation) for a Single Scan

 on page 4-25)

2.

Die Grid Navigation (see Figure 4.12 on page -17) uses the representation of the 
sample that appears in the Sample Navigation Grid at the right of the XY View 
screen. To move the to a specific die, click its location. The system moves the 
stage to that die and focuses on the feature. The feature’s position is indicated in 
the die representation below the Sample Navigation Grid.

Enabling the Dropout Die Option

4

Go to the 

Teach Scan

 window, and press the 

SHIFT

 key while clicking the dies in the 

Die Grid Navigation Window that are to be dropped out. These dies are not scanned.

The die is blacked out. To restore a dropped out die, click it again. 

Clearing Dropout Dies From the Grid

4

From the 

Die Grid

 menu, click 

Clear Drop Out Dies

. The dies are restored to 

availability for scan purposes.

Moving to Partial Dies

4

1.

From the 

Die Grid

 menu select 

Enable Partial Die

 to enable the Partial Die option.

2.

Go to the 

Teach

 window, click 

Die Grid

, then click 

Move To Partial Dies

. (See 

Figure 4.23

.)

3.

In the Die Grid Navigation Window, click the partial die to navigate to it.

Figure 4.23

Die Grid Menu From the Menu Bar

Содержание P-16+









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды