33
Programming
General operating instructions
• Long press the keys or for more than 3 seconds
causes the value is progressively and rapidly up or down
counting (in 5 second increments)
• If you have begun to set a cooking time mode and have not
continued, if after 5 minutes with no further input, the oven
was made to return to the manual mode.
• Pressing the button for more than 3 seconds can stop
the current setting and enter the manual mode.
• The simultaneous pressing of buttons and for more
than 3 seconds to switch the unit to standby mode.
• We recommend that you leave the oven first run for 15
minutes at 200 degrees to remove residues on the surfaces.
2.
• Press the button again until you see „End“ on the
screen.
• Use the keys and to set the finish time.
• Press the button to confirm. The time of day and the
icon appears again. The icon will disappear until the
cooking process starts.
You can set a time which is up to 23:59 hours from the cur-
rent. The oven will start working when the time after dedu-
cing the cooking time is reached from the target time.
• After that, an acoustic signal will sound and the will
flash.
• Set the knob to zero position.
• The short pressing of any key will stop the signal.
• Pressing the for more than 3 seconds will turn the
device back to manual mode.
Please note that you have set to full auto mode,
the times during which can not change. For this
you need to cancel the first mode and reprogram.
EN
1 Hook-in racks with rack levels
2 Lighting
3 Fan with ring heater
4 Grill heating element
5 Top element
6 Bottom heat radiator (under the oven floor)
Inside the oven
1
to
4
:
Shelf levels for shelf unit, baking tray or roasting pan. Ple-
ase note that the numbering of the rack levels from bottom
to top.
1
1
1
2
2
6
2
4
5
3
2
3
4
