20
Using the dishwasher
!
!
The Washing program „ECO“ is „medium“ for the flushing of
the suitable soiled dishes and most efficient in terms of com-
bined energy and water consumption.
The fair values of the washing program are a guideline only. Cir-
cumstances that are not dependent on the device, for example
the temperature of the supplied water, the water pressure, etc.,
may affect the overall duration of the wash cycle.
* Default program, according to the test cycle.
1. Draw out the lower and upper basket, load the dishes and push
them back. It is commended to load the lower basket first, then
the upper one (see the section entitled “Loading the Dish-
washer”).
2. Pour in the detergent (see the section entitled „Salt, Detergent
and Rinse Aid“).
3. Insert the plug into the socket. The power supply is 220-240 VAC
/50 HZ, the specification of the socket is 10A 250VAC. Make sure
that the water supply is turned on to full pressure.
4. Open the door, press the power button, and the light will turn on.
5. Press the Menu button, then press the P-button, the wash
program will be changed as follows direction: Auto→intensive
→normal→ECO→90 Min→glass→rapid→soak→;
Select a program. Then close the door, the dishwasher begins to
start.
Make sure that notes from the first section have been complied
with „before first use“.
4.1 Set up the washing program
