35
EN
Connection of the hob
Technical details
Important
During installation, the power cable position must be taken
account in. Avoid the temperature to be above 50 °C at any
point of the power cable. The oven complies with safety
standards set by the regulatory bodies. The oven is safe to
use only if it has been adequately earthed in compliance with
current legal requirements on wiring safety. You must ensure
that the oven has been adequately earthed.
The manufacturers cannot be held responsible for any
harm or injury to people, animals or belongings caused by
failure to properly earth the oven.
The hob works with 230V alternating current, electrical con-
nection must get the power from the oven. Remember that
the connection should match the same colour , here, for ex-
ample is Black – Black, White-White, Blue-Blue, Green-Green.
Insert the plug located at the end of the hob‘s cable bund-
le into the respective sockets on the oven switch panel.
Installation and connection of the device
Supplier
’
s name
KKT KOLBE
Model
SET6008ED
Oven model
EH6008ED
Hob model
EM590RL
Energy efficiency class
A
Energy consumption
0.89 kWh
Oven capacity
70 Liters
Airborne noise emission
58dB(A)re1pW
Design
Built-in unit
Number of cavities
1
The heat source per cavity
Electricity
Energy efficiency index(EEIcavity)
106
Total power input
9000 W
Power input oven
3000 W
Power input hob
6000 W
Mains voltage / frequency
220-240 V~, 50/60 Hz / 380-415 V~, 50/60
Hz
Fuse
3 x 16A
Protection class / degree
I / IP20
hob connector, protec-
tive conductor
power connector