13
3.2 Parameter Configuration through Client Software
Please refer to the client software instruction manual on the CD supplied with your I.P
camera.
3.3 Parameter Configuration through DVR9K
Before configuration, please make sure that IP cameras are already connected to the same
network. Enter camera management interface Menu Configuration Management
Camera Configuration. Select Add, enter IP Channel Settings interface.
If the IP camera is the same segment with the DVR, please select the IP device in the list,
and then input the correct user name and password in the blanks below. Select OK and
finish adding the device.
If the IP camera is not online or is not in the same segment with DVR, the IP of this
device can be input manually. Select OK and finish adding the device. If the IP camera is
not online, the connection will be setup automatically when online; if the IP camera is not
in the same segment with DVR, the connection will be setup after adding it.
If Status is Connected, it means device successfully added else please examine the
network or adding process. Finish adding all IP devices.
